Bathtub Refinishing Discover The 15 Key Steps You’ll Need To Get Sensational Results For Your Tub Resurfacing Project, Worry Free.
Plus you’ll learn how you can avoid the bathtub refinishing industry’s biggest complaints – peeling coatings & obnoxious odors.
Images open in light box for larger view.
Bathtub Refinishing Are You Looking For A Hygienic – Sanitary – Easy To Clean – Durable And Affordable Fresh New Looking Tub Or Tile… That Guarantees To Add Value To Your Home. If That Is What You’re Looking For?… Then Read On.
Here I’ll cover in simple plain talk, what you’ll really be getting. Bathtub refinishing is much more COMPLEX than simply painting your tub. I’ll address your most pressing questions and fears, because I know you’re interested in getting a new looking bathtub by refinishing because you’re here and you’re reading this web site.
Here’s Why I’m Publishing This Information: In my experience most homeowners really don’t have a CLUE about getting their bathtub resurfaced project done correctly and make the BIG mistake of shopping by price.
You’re At Risk If You Fail To Understand The Basic Tub Refinishing “PROCESS” Because You’ll Be Working Blind.
Bathtub Refinishing Is Much More COMPLEX Than “Just Having Your Tub Painted” Here’s Why…
“Surface Preparation Part Of The Process Is Perhaps The Most Critical And Most Easily Shorted By Cheap Refinishing Contractors Dirty Tricks.”
They won’t abrade or etch the tub’s surface and use anti-logic to convince you they are doing you a favor. Abrading the surface provides much needed “Mechanical Adhesion” anyone who’s seen HGTV and seen furniture being refinished knows that the surface must be sanded-abraded, before staining or varnishing, it’s just common sense…right?
Think about it… Porcelain and enameled tubs cannot be abraded by sanding so a chemical etching solution is used. Acrylic or Fiberglass tub and surrounds can be easily abraded by scuffing or sanding. In the following short video I’ll prove why you need to understand…
- Why is HF Acid used?
- Is it safe?
- Does it hurt your plumbing?
Why would we go to the trouble, expense and training if HF Acid did not provide a benefit to you?
Watch the video and follow the critical steps needed when considering bathtub or tile refinishing.
You may also be interested in Tile Refinishing:
There are many fine men and women that paint bathtubs and tile, and most are fine and decent people that work hard… AND THEY ARE FINE FOR WHAT THEY DO, but what I do is quite different… And it’s why the media seeks out my opinion.
Because… you see, while others are just tub painters, I offer you true BATHTUB RESTORATION not to be confused with ‘just painting your tub or tile’. You might say “In a class of its own”.
The difference lies in the high performance of triple adhesion technology of the TubPotion process, that I created, that utilizes polyester vs polyurethane or epoxy coatings.
Along with a water repelling additive built into the TubPotion coating, that helps keep your tub or tile sparking clean. That out delivers in quality and durability every-time.
Because, I believe in offering the highest level of quality and service to our clients. I know you want to be treated just like I would want to be.
I worry about folks looking for cheap deals by inexperienced contractors who can’t get work and keep lowering their prices. Or accidentally falling for a call center posing as a local company, both are a recipe for disaster.
You’ll benefit from my experience starting in 1983 restoring classic cars. My deep appreciation of utilizing the most advanced chemistry to date. And being a Virgo you’ll benefit, that I suffer the dreaded trait of being a perfectionist.
Are we perfect… hardly but we do go the extra mile by in-house certification of each and every technician. We love working for clients who believe in doing things right.
You’ll get unequaled-customer-service. The highest quality product and my personal guarantee you’ll love your bathtub refinishing or it’s FREE. A guarantee other refinishing contractors wouldn’t DARE to offer.
To make your decision extremely easy, I’m going to remove all risk!
You’re protected by our Satisfaction Money Back Guarantee. If for any reason at all you’re not completely satisfied and we cannot make it right. Get in touch with our team and we will give you a complete refund. It’s that simple.
Before I let you go, I wanted to send out a BIG THANK YOU for reading our web page on Bathtub Refinishing & Restoration.
I’m truly excited for you to get started with TubPotion Bathtub Restorations Coatings Systems and see the results. Sincerely Paul Burns | Porcelain Tub Restorations
Startling Most Tub Refinishing Contractors Unfortunately Won’t Remove A Failed Previous Coating.
Which Is Like Putting A New Roof On Your Home Over Rotten Wood – Essential POINTLESS!
- We see daily where a client has a previously refinished tub that was done poorly and is now peeling. If the tub refinishing contractor does not chemically strip the failed coating off as many don’t, but simply give the peeling area a light sanding, then refinish the tub again, the new coating will FAIL guaranteed!.
- It’s really easy to tell who these rip off – unscrupulous cheap tub refinishers are. They won’t ask you any questions about your tub refinishing project when giving you a price quote. You’ll simply get a cookie cutter low ball price so they can get their foot in your door.
- If your bathtub has a previous coating applied and failing it must be completely removed. Chemical stripper costs $30 to $40 dollars per gallon which is generally what is needed and at least 1 hour or more in labor plus the use of respirators or fresh air supply system for safety.
You’ll know you’re talking to a rip-off tub refinishing contractor when they quote you their $299 pricing and don’t ask any questions about the project being done but simply offer one price fits all cookie cutter pricing.
*They are NOT going to strip the failed coating off should you have this problem. Or address other concerns you may have. You’ll simply get a coat & go not a true bathtub restoration.
Astonishing 8 Out Of 10 Bathtub Refinishing Project Will Suffer Miserably From Peeling… Will Yours?
Seriously 8 out of 10… how do I know this? After decades in the refinishing business we see time after time, cheap refinishing jobs go south. Poor surface preparations and cheap tub refinishing coatings are used by all the $299 tub painters.
By etching/abrading the surface dramatically improves adhesion, which again few bathtub refinishing contractors will do.
Provides the first level of adhesion called MECHANICAL ADHESION. This allows the coating a foot-hold to grab onto. Porcelain, fiberglass tub and surrounds are non-porous and etching/abrading is a highly critical factor in adhesion, you’ll want for your project.
Then during the process we apply break thru technologically advanced TubPotion # 8 our exclusive and proven Silane adhesion promoter (think super-glue for coatings).
Our Silane technology, developed by the Germans to keep coatings on vehicles launched into space and must endure absolute zero (-459.67 degrees F.) to RED-HOT re-entry temperatures.
Through testing, no other Silane on the market came even close to the undisputed adhesive power of TubPotion #8 along with etching you now have DOUBLE ADHESION.
But that’s not all, for the piece DE resistance is TubPotion #11 polyester bonding primer, once applied, you now have what I affectionately call TRIPLE ADHESION.
This powerful 3 fold process makes the TubPotion polyester protective bathtub refinishing top coat virtually permanent.
But That’s Just Part Of The Story… Bathtub refinishing contractors dirty tricks who don’t use Silane adhesion promoters, but only use Epoxy for chemical adhesion are providing an out-dated & inferior process.
RECAP: I Highly Recommend For Your Bathtub Refinishing Project, Besides A Proper Cleaning, Damage Repair & Stripping If Needed Is Etching + Silane + Bonding Primer = TRIPLE ADHESION! This Is The FOUNDATION For A Durable Long Lasting Bathtub Refinishing Project.
We spend the bulk of the time refinishing your bathtub in the prep stage and the average time needed is 3 to 4 hours to complete the job.
Confused About What Type Of Coating To Have On Your Project? Essentially Here’s What You Should Know…
We need to discuss the protective top coat, which is responsible for the sanitary, aesthetics, ease of cleaning, gloss and simply a great looking – hygienic bathtub.
TubPotion coatings have an EXCLUSIVE polyester component added to the coating resin, which adds improved leveling for glass like looks.
Improved scratch & cleaning chemical resistance, which adds years to the service life of your tub refinishing project.
See The Undisputed Proof On TubPotion High Performance Tub Refinishing Coatings In This Short Video. Here You’ll See The Results That You’ll Get When Choosing The TubPotion Process & Coatings.
How to get the best performance, adhesion and aesthetics when refinishing your bathtub or tile.
EXCLUSIVE TubPotion #16 Creates A Magical Water Repelling Action. Reducing Water-Spotting, Helping To Keep Your Bathtub Or Tile Sparkling Clean.
TubPotion #16 Is a TOP SECRET Teflon like additive, added to the TubPotion Coatings line so the Teflon effect is built-in the actual coating for years of lasting protection.
After washing our 3 dirty dogs caked in mud, I simply rinsed the tub clean as the day I refinished it and now so can you.
IMPORTANT… Tub refinishing contractors cannot put porcelain back on your tub… if they say they will, they are out right liars. Porcelain requires 1600+ degrees.
Simply Stated: Here are some of the possibilities that bathtub refinishing contractors may use on your tub refinishing project. I won’t even mention the possibility of getting screwed by having house paint (Latex) applied (which sadly happens).
First You Should Understand 2 part coatings have a catalyst component that causes the coating to chemically harden vs. air drying. This is called cross linking coatings.
You may get a bathtub refinishing contractor who’ll use a 2 part Epoxy or a DIY kit from the home center. Which is just 2 part epoxy. Epoxy’s offer some adhesion, poor gloss, soft and easily damaged. Usually require 48 hours to cure. Poor choice in quality and not convenient in downtime. Epoxies are cheap and easier to apply for an inexperienced bathtub refinishing contractor. Most often used by cheap commercial apartment refinishers.
Urethane coatings are very common in the bathtub reglazing industry. Acrylic Urethane’s are usually car paint – Polyurethanes are more often used in industrial equipment coatings.
Lastly… is Polyester coatings most often used in extreme conditions that require the most demanding conditions. Expensive and more challenging to apply and require a highly skilled professional tub refinisher verses a tub painter.
With A Staggering 100s Of Refinishing Contractors Using Different Coatings, Do You Know What You’ll End Up Getting?
Why Do Different Bath Tub Refinishing Coatings Cure Between 4 And 48 Hours?
- Immersion coatings for constant water contact – not concerned with aesthetics or gloss.
- Graffiti coatings provides a Teflon like surface, preventing graffiti from sticking.
- Marine coatings which are geared toward salt, UV exposure and weather conditions.
- Automotive coatings geared for good looks & reasonable durability.
- Industrial coatings for equipment rated for high durability over looks.
- Friction coats rated for high abrasion resistance and strength.
- Teflon like additive repels water, makes our coating non-stick graffiti proof.
- Capable of handling water immersion without peeling, from triple adhesion.
- Weather UV resistant so it won’t yellow over time.
- Extreme durability for years of lasting use.
- High friction & scratch resistance, holds up to your family’s use.
- All while providing flat as glass good looks and high gloss.
- Hygienic sanitary non-porous surface which is easily cleaned.
- TubPotion # 7 & 9 Anti-Slip Solutions easy to clean, provides a safe and secure feeling without sharp grit.
- TubPotion # 8 Silane Adhesion Promoter, literally superglue for coatings.
- TubPotion # 11 Polyester Bonding Primer The Third level Of Adhesion.
- TubPotion # 12 Polyester Polyurethane Hybrid Protective Top Coat. For The Look & Feel Of Porcelain.
“Incredible I Got A Brand Spanking New Looking Bathtub That Was Wonderfully Priced Along With Awesome Service… My Plumber Even Accused Me Of Cheating On Him!” Sara Wells
Can You Image Being Home Alone And Suddenly Finding Yourself Flat On Your Back – Knock Out Cold – Bleeding Badly From Cracking Your Head On A Slippery Bathtub?
Grab Bars Installed In Your Bathroom Are Like Seat Belts In Your Car…
How To Avoid Getting Bathtub Refinishing Fumes Stinking Up Your Home – Forcing Your Family To Retreat To An Expensive Hotel!
Make Your Friends Drool With Envy By Getting Your Tile Walls Or Tile Floors Beautifully Refinished In Multi-Stone, Adds A Stunning & Breathtaking Depth & Textured Effect To Any Boring Bathroom.
This Is Shocking… You’ll Want To Know How To Protect Yourself And Avoid Hiring A Deceitful Snake Oil Refinishing Contractor In 2 Easy Steps.
Somewhere… Someone… Is Hiring The Worlds Worst Bathtub Refinishing Contractor Are You Willing To Bet It Won’t Be You?
- Chemistry and chemical handling.
- Spray patterns for consistent results.
- Color matching to your other fixtures.
- Tub & tile damage repair.
- Odor and over-spray control measures.
- Plumbing knowledge for drain replacement.
- Proper care and maintenance of equipment.
Try Asking The Cheap Price Refinishing Contractor You’re Considering What They Do With The Spray Gun Clean Up & Tub Refinishing Waste.
When Shopping By Tub Refinishing Price Are You Comparing Apples To Lemons?
- Tub refinished before will need chemical stripping… Not just sanded down?
- Do you have a shower door that needs removal – reinstalled?
- Have chips – erosion – rust – tub holding water type damage can add to your quote?
- Caulk removal replacement offered – included?
- Need a custom color or tub matched to your other fixtures?
- Will they provide proper prep including Etching – Silane – Bonding Primer – Type of Top coat used?
- Will proper ventilation system used?
- Offer installing a new Tub Drain – Overflow?
- Transferable Guarantee?
- Offer a Money Back Satisfaction Guarantee?
- We’ll go thru a client questions list so we can match up the proper level of service you’ll need.
- We can often provide pricing by discussing your problem or by having images emailed over.
- Or if you need an estimate, we are happy to provide an FREE In-Home-Estimate.
- Be mindful if calling, my office staff is often fielding hundreds of calls a day and we try to provide all the information a client needs.
- So you may need to wait in the phone queue waiting for your turn or just leave a message and we’ll get back to you ASAP.
TubPotion #10 Our Aliphatic (non-yellowing) high performance polyester catalyst. Creates a chemical reaction in our bathtub refinishing coatings, allowing them to achieve full cure in just 24 hours.
Which is the perfect balance in set time for you and the coating in convenience and durability.
*Be-warned… Bathtub refinishers touting 4 to 12 hour cure, their using an accelerator in the polyurethane that makes the coatings brittle and chip easily and which I don’t recommend.
The 48 hour cure is an epoxy which are slow to set up. Yellow with time and tend to be easily damaged. Nor do they provide the glassy smooth porcelain look of TubPotion polyester coatings.
Coatings Are Rated For Different Applications Such As:
After Working With Coatings Engineers… I was able to develop a polyester polyurethane hybrid tub – tile – countertop coating system that gave us the best of all worlds:
The closest a coating could possibly come to the look and feel of real porcelain. Convenient 24 hour cure – back online service.
From E-How.com Excerpt on Polyester vs. Polyurethane.
Polyester Polyurethane (What we use.)
• Polyester polyurethane is considered to provide optimal protection over polyurethane, because… it is highly stain-resistant, abrasion-resistant and chemical-resistant. Best results are achieved when applied by professional spray equipment. Polyester develops 95% of its full properties in just 24 hours.
Common applications for Polyester polyurethane coatings are used when optimal protection is required for industrial applications, airplanes, boats, floors and porcelain tub & tile refinishing.
What Does This Mean For You?… IMHO TubPotion System – Process – Coatings Are The Optimal Choice For Your Porcelain Tub Refinishing Project, Bar None.
Installing a new drain – overflow makes your tub look like a brand new gorgeous install, your plumber may think you’ve been cheating on him as well?
We often see worn-out tub drains and overflows, now is the perfect time to have these replaced.
Plus you’ll enjoy many added years of extended service life from your bathtub resurfacing.
Because, having your new TubPotion coating sealed and protected under the drain, not only provides a clean look verses taping it off.
Because, having the coating sealed like this under the drain prevents the erosive power of running water work at the coatings edge.
*Note: We do require access to your tubs plumbing during this process. One to check for leaks after the install.
Second, should your tubs plumbing be weaken over the years, it occasionally breaks under the tub during drain removal.
With access, this becomes much less of a problem for us to repair. We are also hesitate to remove drains when you have non-standard plumbing known as a J-Trap and would require a plumber. Check out my bathtub plumbing access page… GO HERE.
If you don’t have access we may be able to add an access panel to your tubs plumbing. We can advise you on your FREE-IN-HOME-ESTIMATE.
Most plumbers will charge $350 or more to replace your tubs drain/overflow. We offer special discount pricing for our savvy customers choosing this service during a bathtub resurfacing.
I’ve developed special tools and procedures for getting out the most stubborn seized drains. Often they come out without a hitch, but when they don’t, our drain removal system will get the job done. To see the full post on bathtub drain replacement… GO HERE.
*Note: Requires a return trip to re-install the triple plated chrome Watco drain. We carry a full assortment of different drain sizes and thread combinations and can retrofit 99% percent of tub drains.
According to the Centers for Disease Control and Prevention, every year about 235,000 people over age 15 visit emergency rooms because of injuries suffered in the bathtub, and 14% are hospitalized.
Bathtubs refinished with our exclusive TubPotion coatings are super smooth and glossy slick, which is great for keeping your tub clean. Just as if it were a brand new tub. Let us help protect you and your family from horrendous injuries.
The TubPotion bathtub refinishing process WITH TRIPLE ADHESION is the only system that allows you to use a bathmat on your tub over your refinished tub.
The only caveat is that you remove the bathmat after each use and hang over the tub’s rail too allow the trapped water to drain.
Because, this is important, as trapped water under the mat becomes stinky, stagnate and can mar or damage the new coating. This is true for new tubs as well.
Avoid this hassle by having us install our gorgeous TubPotion #9. Available in our Pro or Elite Package2 full years in development, I’m super proud of this product. Built into the coating system for incredible lasting protection.
Easy to clean and virtually indestructible, TubPotion #9 is an awesome addition to your bathtub refinishing project.
Not only looks stunning, it provides a safe a secure feeling when getting in and out of the tub. When bathing, lovingly holds your body so you don’t slip under the water. Making for a more relaxing bathing experience.
Exclusive TubPotion #9 provides an extremely comfortable experience. Many consumer have felt the sharp, painful & uncomfortable grit that other bathtub refinishing contractor’s offer.
Exclusive TubPotion #7 also included in our PRO & ELITE package also provides a safe and secure feeling, the perfectly round micro-spheres avoids the sharp grit problem.Applied during the prep stage. Then once the TubPotion coatings applied, locking the micro-spheres into the coating system.
We offer anti-slip solutions built into our bathtub refinishing for our ELITE & PRO packages for NO ADDITIONAL charges.
One the ADA (Americans with Disabilities ACT) mandates bathtubs have this. And I believe in protecting my inner-circle clients from nasty slip and falls.
Good News… Cleaning for both is a snap, using a soft bristle brush works great. Using a mild gentle cleaner simply wipe down the tubs bottom once a week or so if needed. Our water repelling coatings should make cleaning your tub – tile or non-slip effortless.Foolishly… for some strange reason folks seem to think grab bars are for the elderly or disabled?
Imagine, not having a banister and hand rail when traveling down the stairs. Pretty unsafe, I say. Grab bars are one of the first things I install in any home I’ve ever been in and so should you!
I highly recommend having a 24″ or 36” bar installed along the long wall of the tub and the second one an 18” bar installed, where you step out from the tub, giving you a secure point to hold on too.Take advantage… when installing grab bars with your bathtub refinishing project & you’ll get special pricing.
Don’t be a Homer and become a statistic. Anti-slip and grab bars will help you sleep better at night, knowing you’ve done everything possible to keep your family safe.
The lingering bathtub ODOR problem is a huge problem folks complain about.
Here’s how to keep the bathtub refinishing solvent odors at bay and have a pleasant experience.Because… If a bathtub refinishing contractor, even uses an exhuster to remove odors at all? They’ll use a box fan in the window not rated for flammable solvents or an inadequate 8” ventilator with flimsy foil hose that tears and knots up. Polluting your home with strong chemical smells that linger for days.
Avoid this problem with our 12” Vortex 3000 cubic foot per minute exhuster – ventilator with tear proof poly-vinyl hose. We carry 64’ of hose that will handle just about any situation.
This powerful exhauster removes the majority of bathtub refinishing odors. Extremely effective, I’ve had clients reading the paper on the couch right next to where I was working.Because…These small under-powered leaky ventilators are convenient for the lazy tub refinisher to carry around.
It won’t be convenient or inexpensive for you when you have to leave your home?
Our Coatings Have A Pleasant Citrus Additive… Our exclusive scent added to our coatings, which change the odor to a much more pleasant citrus smell. Making for a much more comfortable experience.For special circumstance… especially where the windows don’t open like hotels. I designed and built the Vortex 5000.
The powerful motor pulls the odors thru 200 cubic inches of a specially treated activated carbon and pre-filters.
Odors go in and fresh air comes out. I have to recharge the filter bed after each 10 jobs or so. Adding to our cost, but the advantages, have proven themselves in difficult situations.
Now Some Folks Are Hyper-Sensitive… to these odors and may have a complaint, if that’s you… well refinishing may not be right for you? If you go ahead and feel the need for a hotel room, it’s on you… Fair enough?Besides having your bathtub refinishing done you may be interested in having your ceramic wall tile refinished as well. Ceramic wall tile refinishing…Click here.
Or even your Ceramic floor tile refinishing… Click here.
Also great for Kitchen or bathroom countertops too…Click here.
Have us come out with our samples or visit us at our showroom in Bowie, Md.
Multi-Stone adds dimension and a rich textured look to any boring bathroom or kitchen project.
To see all our specialties visit the Bathroom Refinishing Services Page for a complete list.
In This Video You’ll Quickly Discover Just How Shady The Bathtub Refinishing Industry Is.
Don’t Be That Guy/Gal That Ends Up A Loser… In the video I give you easy action steps to take to find a legitimate bathtub refinishing contractor for your project. Yes I’d like for you to choose us… but I’m more interested in you getting real value and an honest contractor.
You should use the video trick anytime you’re considering any contractor. I gotten calls/emails from across the nation thanking me for the information.
If you follow these simple steps you’ll be left with a fraction of the bathtub refinishing contractors advertising this service too investigate further.
There are far too many inadequate 2 day bathtub refinishing training schools that PUMP out 100’s of unqualified & poorly trained bathtub refinishing contractors.A fully trained Bathtub Tile Refinisher can take years to acquire a full set of skills required.
Unable to find ELITE & qualified technicians. I had to solve the problem. By building a training center here at our 5000 sq. ft. facility. Where I personally certified each employee thru an extensive bathtub, tile refinishing course.
I have not hired one single tub refinisher from another company that could match our unrivaled standards and didn’t require complete retraining. My comprehensive course covers a broad range of knowledge.
Resurfacing bathtubs creates a lot of waste material after each job with left over urethane and solvent material after clean up.
I’ll bet you a cup of Starbucks they are throwing this into the trash.
My guy’s bring me back the waste and I run this thru a distiller, which recycles the material for us to use in cleaning our spray equipment.
Others throw this toxic soup of solvent waste into our landfills.
By choosing, Porcelain Tub Restorations you can be confident, that your bathtub refinishing project will not contribute to polluting our environment.
Our coatings comply with strict environmental regulations on VOC’s (Volatile Organic Compounds) or simply put pollution.
So As You Can See… it’s important to compare the advantages you’ll be getting when choosing Porcelain Tub Restorations and the TubPotion Process.
It’s not about apples to oranges – but apples to lemons – if you go ahead and choose the lemon route, just keep our info handy, you’ll most likely be needing it.
Should You Be Selling Your Home, A Quality Job With A Transferable Guarantee Will Make Your Home Sell Faster & For More $$$. You’ll Sleep Better Knowing You Did The Right Thing.
If You Take A Moment… To check out these authority sites they’ll concur that our pricing is in line with a quality job. Be mind-full their cost projection don’t cover additional services – needs – or when written, counting for inflation?
(Links open in a new window)About.com – Discusses getting a quality job & cheap pricing results.
Homewyse – Bathtub refinishing cost calculator.
Costhelper Home & Garden – Article on bathtub refinishing cost.
See My Full Post On Types Of Tub Damage & Situations That May Add To Your True Expense Getting Your Project Done Right.
Instead of asking us to price match the cheap guys, just try asking them to match our products quality, customer service and UN-heard of satisfaction guarantee.
How Much Should Bathtub Refinishing Cost?
Contractors who quote cookie-cutter one price fits all… are not going to address your real problems or concerns.
A legitimate tub refinishing contractor should interview you about your project and if you’re unsure about answering the questions, they should be willing to offer a FREE in-home-estimate.
Your Pricing Will Be Based On The Problem You’re Trying To Solve… Such as:
Tub refinishing does not hide damage but will magnify it. Stripping a previous failed tub refinishing is mandatory.
Here You Won’t Find A Cookie Cutter One Price Fits All Or Bait And Switch Practices.
Our Pricing Is Twofold: Number 1 and I’m just being completely honest with you. You value a product with the demand it generates, the demand for TubPotion Process for tub resurfacing has been so overwhelming we keep 11 trucks running all year long.
Number 2 the results our clients receive, after refinishing tubs and tile for over 25 years we’re seeing returning clients coming back after 2 decades to get their bathrooms refinished again.
We never use under-insured sub-par sub-contractors, for your protection all technicians are certified trained employees, with workman’s comp.
So… if You’re Ready, You Need To Contact Us Now By Clicking On Your Preferred Method.
Don’t forget to get your, Ultimate Guide To Having Your Bathtub Or Tile Refinished. It’s a 25 page action packed PDF to assist you in selecting a great bathtub refinishing contractor.
For links to all our services… Visit Bathroom Refinishing Services Here.
TubPotion Coatings Bathtub Refinishing
By: Paul Burns Photographed In: Bowie, Maryland Date Uploaded: 2013-02-14
Description: TubPotion Coatings For Bathtub Refinishing, Looking Forward To Working With You.
“Thanks For Being One Of The Most Professional Contractor I Have Ever Dealt With. I Have Never Been More Impressed By Anyone. YOU GUYS ROCK!!!! You Deserve Every Customer In The Area!” Steve Galusha
Serving: Maryland, Washington D.C. and Northern Virginia
Service Type: Bathtub Refinishing : Affordable & Effective Solutions For Worn-Out, Damaged & Outdated Bathtubs By Refinishing.Bathtub Refinishing: TubPotion process and coatings for bathtub refinishing. If you’re looking for REAL transformational value that makes your bathtub super easy to clean, long lasting & beautifully applied.
Areas We Serve For Bathtub Refinishing Near Me : Aberdeen MD | Accokeek MD | Annapolis MD | Arnold MD | Baltimore MD | Bel Air MD | Beltsville MD | Bethesda MD | Bladensburg MD | Bowie MD | Burtonsville MD | Catonsville MD | Clinton MD | Cockeysville MD | College Park MD | Columbia MD | Crofton MD | Dundalk MD | Edgewood MD | Elkridge MD | Ellicott City MD | Elkton MD | Essex MD | Fort Washington MD | Gaithersburg MD | Germantown MD | Glen Burnie MD | Glenn Dale MD | Greenbelt MD | Hyattsville MD | Lanham MD | La Plata MD | Laurel MD | Maryland | Middle River MD | Montgomery Village MD | Odenton MD | Olney MD | Owings Mills MD | Pasadena MD | Perry Hall MD | Pikesville MD | Poolesville MD | Potomac MD | Rockville MD | Randallstown MD | Reisterstown MD | Severn MD | Severna Park MD | Shady Side MD | Silver Springs MD | Stevensville MD | Takoma Park MD | Temple Hills MD | Towson MD | Waldorf MD | Wheaton MD | Westminster MD | White Marsh MD | NOVA | Northern Virginia | Arlington VA | Alexandria VA | Annadale VA | Chantilly VA | Fairfax VA | Falls Church VA | Great Falls VA | Herndon VA | Leesburg VA | Manassas VA | Springfield VA | Washington DC | Prince Georges County | Montgomery County | Anne Arundel County| Howard County |
Bathtub Refinishing Questions Comments Post Below or Contact Us Porcelain Tub Restorations… Really appreciate a LIKE or a SHARE below and thanks for coming by.Submit your reviewAverage rating: 288 reviewsJul 30, 2020Hundred year old tub
Had a renovation done on a claw foot tub from 1914. The tech did an excellent job. The porcelain refinishing made it look new and it will be... View MoreJul 29, 2020Full Bath Remodel Very Impressed
Vinny showed up for our estimate, very knowledgable and patient. Explained the process and order of what needed to be done. We had a neighbour... View MoreJul 14, 2020DIY Fiberglass Tub/Shower Surround Refinishing
I contacted Mr. Burns about purchasing a refinishing kit for the above project. Mr. Burns responded quickly and provided me a step by step guide... View MoreJul 9, 2020Great experince getting our bathroom remodeled.
Some of the best folks I've worked with as far as getting a project done. Easy to communicate with, good pricing, on time and the work ethic... View MoreMay 28, 2020Customer Service Off The Charts
5 stars, I would use them again without hesitation! It wasn't just the quality of the end product (which is excellent), it was the customer... View MorePage 1 of 58:«‹123›»Submit your reviewBathRenovationHQAverage rating: 0 reviews